冷床設備推薦 圣霖國際創新發展

該冷床設備主要用于軋后鋼板在線緩慢自然冷卻。在型材生產線上，冷床對型材還具有預彎曲功能，防止型材在自然冷卻過程中因各處質量不等導致出現不規則彎曲。應用領域：冷床主要應用在鋼鐵行業、冶金行業等。

With the cooling bed equipment is mainly used for rolling steel platesonline slow natural cooling. Profile production line has the function of cooling bed pre bending profiles, prevent profiles in the natural cooling process of the entire qualityranging from lead to irregular bending. Application: bed is mainly used in the iron and steel industry, metallurgical industry, etc.

優化水量，優化步距。盡可能的使型鋼完整進入水區，加強現場通風，保證型鋼進入水區前溫度小于400℃。水冷時間不宜過長，因為冷卻時翼緣為拉伸—壓縮—拉伸過程.

Optimize the amount of water and optimize the step distance. As far , the steel can be fully entered into the water area, and the field ventilation is strengthened. The temperature of the steel before entering the water area is less than 400. The time of water cooling should not be too long, because the flange of the wing is stretched, compressed and stretched.

經常檢查相應輥面磨損情況，有積瘤的要及時清理；觀察進鋼情況，保證入口導位位置正確；經常卡量矯直盤圓角與成品圓角；制定合理的矯直力，盡量避免回矯；合理控制冷卻過程；保證型鋼低于80℃進入矯直機；注意觀察各輥軸向、垂直竄動量，做到及時應對。

Always check the corresponding roller surface wear, a tumor of the product to clean up; on steel, ensure the ce guide the correct ; often straightening and finished plate fillet fillet; reasonable straightening force, try to avoid the back; the reasonable  of the cooling process; ensure the steel is lower than 80 DEG C into the straight machine; observe the roll axial and vertical movement, timely respe.