四平reducer誰家好優選商家

減速機是國民經濟諸多領域的機械傳動裝置，行業涉及的產品類別包括了各類齒輪減速機、行星齒輪減速機及蝸桿減速機，也包括了各種專用傳動裝置，如增速裝置、調速裝置、以及包括柔性傳動裝置在內的各類復合傳動裝置等。

The reducer is a mechanical drive device in many fields of national economy, industry related product categories include all kinds of gear reducer, planetary gear reducer and the worm reducer, also includes a variety of special transmission device, such as accelerating device, device, and a flexible transmission device, transmission device, including various types of composite.

安裝前確認電機和減速機是否完好無損，并且嚴格檢查電機與減速機相連接的各部位尺寸是否匹配，這里是電機的定位凸臺、輸入軸與減速機凹槽等尺寸及配合公差。

Before installation, confirm whether the motor and reducer are in good condition, and strictly check whether the size of each part of the motor connected to the reducer is match. Here is the size and fit tolerance of the motor's locating lug, input shaft and reducer groove.

在輸出軸上安裝傳動件時，不允許用錘子敲擊，通常利用裝配夾具和軸端的內螺紋，用螺栓將傳動件壓入，否則有可能造成減速機內部零件的損壞。

When driving parts are installed on the output shaft, it is not allowed to knock with hammers. Usually use assembly jig and inner thread of shaft end to press the transmission parts into bolts with bolts, otherwise, it may cause damage to internal parts of reducer.

當選用斜齒輪減速機時有以下幾點需要注意：

允許輸入軸徑：減速機的輸入軸孔與電機輸出軸一般是通過一個厚度可以變化的套環來連接的。當不加套環時減速機輸入軸孔為高值。

When choosing a helical gear reducer, there are several points to be paid attention to:

Allowable diameter

The input shaft of the reducer and the output shaft of the motor are generally connected by a sleeve that can be changed by a thickness. The input shaft hole of the reducer is the maximum when the ring is not added.