圣霖國際軋鋼設備報價服務放心可靠

鋼的軋制，是整個軋鋼生產過程的核心。坯料通過軋制完成變形過程。軋制工序對產品質量起著決定性作用。軋制產品的質量要求，包括產品的幾何形狀和尺寸內部組織和性能以及產品光潔度三個方面。

The rolling of steel is the core of the whole rolling process. The blanks are rolled to complete the deformation process. The rolling process plays a decisive role in the quality of the product. The quality requirements of rolling products include three aspects, including the internal structure and performance of the geometric and dimensional accuracy of the products and the finish of the products.

軋制速度控制：即軋制時對各道次軋輥的線速度以及每道中不同階段的軋輥的速 度的具體規定，也叫速度規程。

Rolling speed : that is to say, the speed regulation is also specified for the speed of each roller and the speed of each roller  different stages in rolling.

橫軋成型的特點是：1.兩個工作軋輥軸線平行，其轉動方向相同； 2.軋件軸線與軋輥軸線平行，軋件作轉動，其轉動方向與軋輥相反，進出料需專門裝置。

The characteristics of the cross rolling are as follows: 1. the axis of the two working rolls is parallel and its rotation direction is the same; the axis of the 2. piece is parallel to the axis of the roll, and the rolling piece is rotated. The direction of the roll is to the roll, and the special device for entering and leaving the material is needed.

因為四列的短圓柱軸承在外圈上是可以脫落的，所以，也可以將內圈之間安裝于軋輥在輥頸上，并將外圈安裝在軸承座的內部。 我們從軋鋼機整個裝配的過程來看，軋鋼機中軸承以及軸承座在受力的情況上都是比較良好的.

Because the four columns of short cylindrical bearings can be shedding in the outer ring, the inner ring can also be installed between the roller and the roll neck, and the outer ring is installed inside the bearing seat. In terms of the whole assembly process of rolling mills, the bearings and bearing housings in rolling mills are relatively good in force.