圣霖國際冷床承諾守信「在線咨詢」

由冷床入口輥道及升降擋板、橫移小車、分鋼裝置、步進齒條冷床、編成組的圓鋼，通過橫移小車移送到冷床分鋼裝置，動齒條每步進一個周期，分鋼裝置就撥一根鋼到靜齒條上，使成組的圓鋼逐根分配到每一個齒內，由于上冷床的圓鋼溫度很高。

It cists of cooling bed and lifting baffle, roller, steel traversing trolley device, stepping into the steel group, rack cooling bed, transferred to the steel cooling bed device by traversing trolley, moving rack each into a cycle of steel means a steel dial to static rack, the circular steel group one by one assigned to each tooth, because of high temperature steel cooling bed.

保證合理有序的過鋼節奏，加大矯直測量次數，確保矯直中心在一條直線上。制定矯直輥裝配標準，保證安裝正確，有據可查。建立BH值與矯直輥間距的關系，做到合理配輥，保證輥縫在1－3mm之間。

Ensure a reasonable and orderly flow of steel rhythm, increase the number of straightening measurement, to ensure that the straightening center in a straight line. The assembly standard of straightening roller is set up to ensure that the installation is correct and can be checked up. The relatihip between the BH value and the spacing of the straightening roller is established, and a reasonable roll matching is made to ensure the gap between 1 and 3mm.

首先確定所需壓力的大小，主要取決于以下幾方面：被矯鋼材的品種、規格；待矯軋件的原始彎曲程度；待矯軋件的終軋溫度；被矯軋件的機械性能；矯直溫度等。

First, determine the size of the required pressure, which mainly depends on the following aspects: the varieties and specificati of the straightened steel, the original bending degree of the rolled piece, the finishing temperature of the rolled piece, the mechanical properties of the leveled piece, the straightening temperature and so on.