輥道廠家服務至上

輥道是軋鋼車間運送軋件的主要設備，其重量占整個軋鋼車間設備總重量的40%左右，是軋鋼車間中使用多的設備。軋件進出加熱爐，在軋機上往復軋制及軋后輸送到精整工序等工作均由輥道來完成。

Roller table is the main equipment for rolling parts in rolling workshop. Its weight accounts for about 40% of the total weight of the whole rolling workshop. It is the most used equipment in rolling workshop. Rolling in and out of the heating furnace, the rolling mill on the rolling mill and after rolling to the finishing process and other work are completed by the roller.

為使鑄坯平穩迅速地運送，有時將這個區的輥道設計成可升降的。輥道按驅動方式可分為集中傳動輥道和單獨傳動輥道兩種。集中傳動輥道由一臺電機帶動一組輥子，通過電機一減速機一鏈輪傳動，或者通過電機一減速機～長軸一傘齒輪傳動方式傳動。

In order to deliver the billet smoothly and quickly, the roller table in this area is sometimes designed to be lifted and lifted. The roller table can be divided into two types: the  drive roller and the separate drive roller. The  driven roller table is driven by a motor to a set of rollers, driven by a motor, a reducer or a sprocket, or through a motor, a reducer, a long shaft and a bevel gear transmission mode.

包膠滾筒安裝方便

包膠滾筒安裝起來特別的方便，不需要安裝好在送過去，現場進行安裝就可以了，滾筒也是不需要拆卸的，這樣是非常方便的，你只需要付錢、收獲、等著用就可以了，其他的都有專業的人士來干。

Easy installation of rubber drum

Package rubber drum installation is especially convenient, do not need to install in the past, the site can be installed, the cylinder is not required to be disassembled, so it is very convenient, you only need to pay, harvest, and other use, and other professional people to do.

鏈板輸送機以標準鏈板為承載面，由馬達減速機為動力傳動；我們可以通過多列鏈板并行，使鏈板輸送機做的很寬并形成差速，利用多列鏈板的速度差使多列輸送在無擠壓的情況下變?yōu)閱瘟休斔汀?/span>

The chain plate conveyer takes the standard chain plate as the bearing surface, and the motor reducer is driven by the motor. We can make the chain conveyor be very wide and form the differential speed through the multi chain chain plate.