鶴壁移動式混流泵價格性價比出眾

混流泵

3.

Installation base:The soil texture should be firm and solid.

 4.

During installation, keep the pump axile in horizontal p ition.

 5.The end of

water inlet pipe should be immersed under water in about one meter and far away

from the end of mud in about half meter.

 6.After installing the pump,calculate the

suitable suction height and head.Under the stable water level condition,

4、注意填料的冷卻情況，填料的的調整，不可太緊，以液體能一滴一滴漏出為準，填料太緊發(fā)熱、消耗功率。填料太松、使水泵中的液體漏損過多，降低效率。

Pay more

attention to the cooling condition of padding.The padding can not be too tight,

it is ok that the fluid can leak in drops.The temperature will be high if the

padding is too tight which cumes power.If the padding is too loose, the

fluid leaks too much, the efficiency will be lower.

在水泵工作過程中，泵內流動的水受到其與流道和泵葉輪表面的摩擦以及水身粘度的影響，泵所消耗的能量主要用于抵抗水表面的流動摩擦力及渦流阻力。其次檢查是否是水泵自身的機械故障，常見的原因有：填料太緊或葉輪與泵體之間被雜物卡住而堵塞。水在流動過程中所消耗的能量(水頭損失)就是用來克服內摩擦力和水與設備界面的摩擦力。如果泵、葉輪表面光滑(這種表面稱為水力光滑表面)表面阻力較小。消耗能量就小，在水泵過流面和葉輪上噴涂高分子復合材料，使其表面形成水力光滑表面，超光滑表面涂層表面光潔度是經(jīng)過拋光后不銹鋼的20倍，這種極光滑的表面減少了泵內流體的分層，從而減少泵內部紊流，降低了泵內的容積損失和水力損失，降低了電耗