圣霖國際軋輥在線咨詢

由于軋制過程是連續的過程，因此操作人員需要不斷檢測軋輥狀況，使生產出來的產品滿足用戶對更嚴格的公差和表面質量的要求。

As the rolling process is a continuous process, the operator needs to continuously detect the roll status to meet the more stringent tolerance and surface quality requirements of the products produced.

生產長材產品的軋機種類繁多，因此，軋機類型的選擇、布局，軋輥材質的選擇、軋輥尺寸的確定，選擇范圍也非常廣。同時，不同的軋機所選擇的軋輥也是不相同的，需要根據生產要求選擇軋輥。

There are a wide variety of rolling mills to produce long timber products. Therefore, the selection and layout of the type of rolling mill, the selection of the material of the roll and the determination of the size of the roll are also very wide. At the same time, the rolls chosen by  rolling mills are also the roller should be selected according to the production requirements.

被軋制的鋼種  

被軋制的鋼種是選擇軋輥的關鍵因素，其抗變形能力隨坯料化學成分不同而改變，主要表現在軋制的各階段變形的負荷大小和變化。必須根據確定的強度和硬度選擇軋輥。  

Rolled steel

The rolled steel is the key factor to select the roll. Its deformation resistance varies with the chemical  of the billet. It is mainly manifested in the load and change of deformation in each rolling stage. The roll must be selected according to the determined strength and hardness.