輥道報價品牌企業【圣霖國際】

支架多用型鋼制成，有焊接和螺栓連接兩種結構。為了通用和便于制造，已把上述三種常用輥子的支架作成具有標準長度的通用構件，在設計時可直接選用。

The  is made of  steel with two structures: welding and bolt connection. For the  of generaland convenient manufacturing, the above three common roller  have been used as a common component with a standard length, which can be used directly in the design.

用這種支架時，輥子安裝完畢需用鋼絲進行鎖緊（即相鄰3～5個輥子軸用鋼絲串在一起）。輥子Φ155的支架采用槽鋼，輥子軸用壓板和螺栓固定在槽鋼翼緣上。

When the bracket is used, the roller is installed with the steel wire to be locked (that is, the 3~5 roller shafts are strung together with steel wire). The support of the roller 155 is used in the channel steel, and the roller shaft is fixed on the flange of the channel steel with the press plate and bolt.

輥道的傳動形式有集體傳動，單獨傳動和空轉輥道三種。

①集體傳動輥道——由一臺電動機同時帶動所有的或其中一部分輥子。通常是4~10根輥子。

②單獨傳動輥道——每個輥子或每兩個輥子由一個單獨電動機帶動。

The drive form of the roller table has three types: collective drive, single drive and roller table.

(1) a collective drive roller - a motor that drives all or some of the rollers at the same time. It is usually the 4~10 root roller.

(2) a separate drive roller track - each roller or two rollers are driven by a single motor.

包膠滾筒安裝方便

包膠滾筒安裝起來特別的方便，不需要安裝好在送過去，現場進行安裝就可以了，滾筒也是不需要拆卸的，這樣是非常方便的，你只需要付錢、收獲、等著用就可以了，其他的都有專業的人士來干。

Easy installation of rubber drum

Package rubber drum installation is especially convenient, do not need to install in the past, the site can be installed, the cylinder is not required to be disassembled, so it is very convenient, you only need to pay, harvest, and other use, and other professional people to do.