500軋機報價常用指南「多圖」

關于機械產量，二十世紀七十年代后期，控制冷卻技術的發展使得鋼板軋制中的TMCP技術得到廣泛發展。

With regard to mechanical production, the development of cooling technology in the late 1970s made the TMCP technology develop widely in steel plate rolling.

機架是軋鋼機的主要部件，它在軋鋼過程中承擔金屬變形給予的負荷。因此要求機架有足夠的強度和剛度，以保證設備安全和產品質量。型鋼軋機的機架形式較多，常見的機架形式有開口式機架、閉口式機架和半閉口式機架3種。

The frame is the main component of the rolling mill, which bears the load given by the metal deformation during the rolling process. Therefore, the frame is required to have sufficient strength and stiffness to ensure the safety of the equipment and the quality of the product. There are more frame forms of the steel mill. There are 3 kinds of common frame forms: open frame, closed frame and half closed frame.

軋機的輥系在換輥前可以預安裝并調整好，軋機停車后只需較短時間即可換上新輥系。而新輥系經少量試軋后即能軋出合格產品。因此這種軋機可調性能好，成材率高。

短應力線軋機可制成二輥式、三輥式或四輥式多種形式的軋機。在型鋼、線材和板帶鋼生產中部有應用。

The roll system of rolling mill can be pre installed and adjusted before changing the roll. After the rolling mill , it only needs a short time to replace the new roll system. The new roll system can be rolled out of the qualified product after a small amount of test rolling. Therefore, this kind of rolling mill has good adjustable performance and high yield.  

The short stress line mill can be made into two - roll, three - roll, or four - roll type rolling mills. It is applied in the middle part of steel, wire and strip steel.

軋機專業廠家介紹，其實從實際生產作業來看，關于冷軋機的安全生產主要包括三個方面，分別為：定期檢修、日常安全操作以及日常的培訓管理等。

In fact, from the actual production operation, the safety production of the cold rolling mill mainly includes three aspects, which are the regular maintenance, the daily safety operation and the daily training etc.