您好，歡迎來到易龍商務網！
發布時間：2021-10-28 02:08
【廣告】
ROMIX-銷售TEKON探針
Assembly description using the TEKOFLEX TF07 as example:
To be able to use the TF07 as a contact element, you need a
housing, a front cover plate and a rear cover plate. The latter
secures the TEKOFLEX contact system against contortion.
These three plates are manufactured separately, pitch tolerance
/?0.05 mm.
First the TEKOFLEX system is inserted into the housing. Then
the rear cover plate is fitted and screwed to the back of the
housing. Finally the front cover plate is fitted and screwed
to the housing.
During the assembly it is important to add < 0.2 mm space
to the TEKOFLEX system to allow tolerance adjustments, see
illustration
夾片針
SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
夾片
EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
夾片
你的好處一目了然
方便用戶的四線測量
過程穩定接觸
易于裝配
低接觸電阻
交配周期的數量很大
高電流等級
注 請給我們寄一張樣品 分別是你方的圖紙
測試對象或讓我們知道您的測試要求 我們會的
開發您的特定測試適配器 包括我們的
TEKOFLEX將很高興提交一個有競爭力的
提議
以TEKO FLEX TF07為例的裝配說明
要使用TF07作為聯接元件 您需要一個
外殼 前蓋板和后蓋板 后者
確保TEKOFLEX接觸系統免受扭曲
這三個板塊分別制造 螺距公差
首 將TEKOFLEX系統插入外殼 然后
后蓋板安裝并擰到背面
住房 后對前蓋板進行安裝和擰緊
去房子
在裝配過程中 增加空間是很重要的
到TEKO FLEX系統允許公差調整請參閱
插圖
