您好，歡迎來到易龍商務網！
發布時間：2021-01-01 12:41
【廣告】
加熱質量好。加熱時介質出爐溫度需符合工藝要求，防止局部過熱出現結焦、結炭或危險。
燃料消耗低。站場用加熱爐的能量消耗有10～15％消耗于爐子上，節省的燃料對降低單位成本和節約能源都有重要意義。
The quality of heating is good. The heating temperature of the medium should meet the requirements of the process, preventing the local overheating from coking, carbon or explosion.
Fuel cumption is low. The energy cumption of the reheating furnace in the station is 10 ~ 15% on the furnace. The fuel saving is of great significance to reducing unit cost and saving energy.
按爐溫分布，爐膛沿長度方向分為預熱段、加熱段和均熱段。進料端爐溫較低為預熱段，其作用在于利用爐氣熱量，以提高爐子的熱效率。加熱段為主要供熱段，爐氣溫度較高，以利于實現快速加熱。
According to the distribution of furnace temperature, the furnace is divided into preheating section, heating section and uniform heating section along the length direction.
The lower temperature of the feed end is the preheating section, and its function is to increase the heat efficiency of the furnace by utilizing the heat of the furnace gas.
The heating section is the main heating section, and the furnace gas temperature is relatively high, which is conducive to rapid heating.
加熱爐能快速加熱，氧化和脫碳少，適用于加熱圓形料坯和鋼管。與行星軋機相配合，可用來加熱連鑄板坯；也可對某些鋼材進行局部加熱。缺點是單位爐長的生產能力低，爐子熱效率較低。
The heating furnace can be heated quickly, with less oxidation and decarburization, and is suitable for heating round billets and steel pipes. It can be used for heating continuous casting slab and heating some steel products. The drawback is that the production capacity of unit furnace length is low and furnace thermal efficiency is low.
蓄熱式加熱爐的傳導傳熱：傳導傳熱是溫度不同的物體直接接觸（或物體存在溫差）由于自由電子的運動（對于鋼材）或分子的運動（對于爐氣）而發生的熱交換現象，此種傳熱發生在鋼材表面及內部和鋼材及爐底之間。
Conduction of conduction in a regenerative heating furnace: conduction heat transfer is the direct contact of a different temperature (or the existence of a temperature difference between a body) due to the movement of free electr (for steel) or the movement of molecules (for furnace gas), which occurs between the surface and inside of the steel and between the steel and the bottom of the furnace.
