圣霖魚尾板生產廠家點擊了解更多「多圖」

壓住材料。克服傳統的模具設計結構，在卸料板上開出容料間隙(即模具閉合時，卸料板與凹模貼合，而容納材料處卸料板與凹模的間隙為材料厚t-0.03～0.05mm)。如此，沖壓中卸料板運動平穩，而材料又可被壓緊。關鍵成形部位，卸料板一定做成鑲塊式結構，以方便解決長時間沖壓所導致卸料板壓料部位產生的磨(壓)損，而無法壓緊材料。

Press the material. In order to overcome the traditional mold design structure, the clearance of material is opened on the discharge plate (i.e., when the die is closed, the discharge plate and the die are fitted, and the gap between the discharge plate and the die is t-0.03 to 0.05mm). In this way, the discharging plate moves smoothly, and the material can be pressed tightly. In the key forming part, the discharge plate must be made into an inlaid structure to facilitate the solution of the grinding (pressure) loss caused by the pressing part of the unloading plate for a long time, and the material can not be pressed.

五金沖壓件加工包括沖裁、彎曲、拉深、成形、精整等工序。沖壓件加工的材料主要是熱軋或冷軋（以冷軋為主）的金屬板帶材料，例如碳鋼板、合金鋼板、彈簧鋼板、鍍鋅板、鍍錫板、不銹鋼板、銅及銅合金板、鋁及鋁合金板等。

stamping process includes blanking, bending, drawing, forming, finishing and other processes. The main materials for stamping parts are hot rolling or cold rolling (cold rolling), such as carbon steel, alloy steel plate, spring steel plate, galvanized plate, tin plate, stainless steel plate, copper and copper alloy plate, aluminum and aluminum alloy plate.

檢查、核對模具和沖壓機床。在安裝模具前，要確認沖壓機床為沖壓工藝的型號，并檢查模具的尺寸、工作要求是否與沖壓機床的技術參數（裝模高度、滑塊行程等）相匹配，沖壓機床的狀態足否良好。

Check and check die and stamping machine. Before installing the mould, it is necessary to confirm that the stamping machine is the designated type of the stamping process, and check the size of the die and the work requirements to match the technical parameters of the designated stamping machine (the height of the die, the slider stroke, etc.), and the state of the stamping machine is good or not.